|
Makfil® USA
Makfil applies quality and technology to its full range of semiautomatic and automatic machines for processing electric cables, in particular machines for cutting, stripping, marking, crimping and tinning single-core, multi-core, flat and coaxial cables. In the research and production of the renewable energy field, new technologies are in high development and they have more and more necessity to process special cables suitable to their requirements. Cutting stripping machines sector's leader, MAKFIL SYSTEM succesfully faced this subject.... |
Items by Makfil® USA: 8
|
CSC-51 - Cutting, Stripping & Crimping Machine
The model CSC 51 is an
automatic machine for cutting,
stripping the wires and
crimping on both sides of them
all types of electrical terminals.
The special feature of this
model,(fully electronic), is
that it does away with the need
for manual work on the
mechanical units whenever
stripping parameters or wire
dimensions change.
Your Price: 69,995.00 |
|
ECS-10 Cutting & Stripping Processable cable: uni-core, multi-core. External cable diameter: 1 mm - 15 mm(0.0394" to 0.591") Insulating material: P.V.C., Teflon, Silicon, etc. ECS-10 is an automatic fully electronic cutting stripping machine, able to process single core and multicore cables up to 15 mm of outer diameter. All the groups movements (feeding and cutting groups) are managed by powerful motors, that guarantee an always perfect and repetitive cycle, also when it is required to process cables with considerable section or with particular insulations. The feeding and stripping groups are equipped with particular rubber bands, that guarantee a precise movement and give the certainly the cable will not be damaged during its processing. All the parameters related to stripping length, cable section, etc, are managed by a dedicated, easy to use and simple control unit.
|
|
ECS-15 Cutting & Stripping The model ECS-15 is a fully electronic cutting and stripping machine. All the parameters related to stripping, length and tickness are managed with the electronic box with microprocessor. This electronic box manages also all the other necessary data, for example cutting length, speed, no. of pieces etc. The main characteristic of the ECS-15 consists in two separate stripping units able to work simultaneously the top and the end of the cable. As application in the sector of the electronic cutting stripping machines that are today on the market, this only configuration, allows this machine to grant high hourly production by simply programming the necessary parameters and mechanical set up. The available power, both on cable feed units and stripping units, is obtained with brushless motors that grant an always continue, precise and repetitive cycle also when it is necessary to process cables with considerable section. A quick set up of the diameter of the cable to be processed is granted by a quick systems for the replacement of few necessary pieces (cable guide).
|
|
ECS-35 Cutting & Stripping The model ECS-35 is a fully electronic cutting and stripping machine. All the parameters related to stripping, length and thickness are managed with the electronic box with microprocessors. This electronic box manages also all the other necessary data, for example cutting length, speed, no. of pieces etc. The main characteristic of the ECS-35 consists in two separate stripping units able to work simultaneously the top and the end of the cable. As application in the sector of the electronic cutting stripping machines that are today on the market, this only configuration, allows this machine to grant high hourly production by simply programming the necessary parameters and mechanical set up. RENEWABLE ENERGY? WIND TURBINES? NOW IT'S EASIER!
In the research and production of the renewable energy field, new technologies are in high development . The ECS-35 can process these special cables suitable for industry requirements. The ECS-35 can cut & strip your most difficult battery cable.
|
|
La Prima "LA PRIMA" is a bench automatic machine for processing single-core wire from both sides. The complete absence of compressed air makes the machine exceedingly quiet and allows it to be used in any working environment.
*The system's most important
feature is the complete
management of all processing
parameters: wire size, cutting and
stripping length, type of stripping
(total, partial or multiple) through
the use of an innovative and
ergonomic keyboard placed on
the control panel. A large display
allows the operator to view the
data settings.
Your Price: 7,995.00 |
|
Magic Top quality and tremendous versatility are combined in these simple and practical machines to satisfy all possible customer requirements. The MAGIC 3-PC and MAGIC 4-P cutting stripping and crimping machines have both been designed and developed along "compact & simple" lines. Both machines nevertheless permit up to 5 different work stations to be installed, including crimping stations, tinning stations, seal applicators, insulation sleeve applicators, and of course double crimping stations for vertical or horizontal doubling. And if you need to code your wires, all you have to do is connect the machine to a hot stamp or ink jet marking system.
|
|
Microlinea The Microlinea is a modular system for unwinding, cutting and stripping single core wires. Includes La Prima, collector, unwinder,and support table.
|
|
SP200 - Cutting Machine The SP 200 is an automatic cutting machine for cables, flat cables, hoses, air and water hoses, sheaths, etc. The special cutting system is the result of years' experience and continuous research in this sector. More info...
|